Hardness Testing Machine, Hardness Testing Machines, Universal Testing Machine, Universal Testing Machines, Mechanical Universal Testing Machine, Mechanical Universal Testing Machines, Electrical Universal Testing Machine, Electrical Universal Testing Machines, Electro Mechanical Universal Testing Machine, Electro Mechanical Universal Testing Machines, Electromechanical Universal Testing Machine, Electromechanical Universal Testing Machines, Electro - Mechanical Universal Testing Machine, Electro - Mechanical Universal Testing Machines, Electro-Mechanical PC Control Universal Testing Machine, Electro-Mechanical PC Control Universal Testing Machines, Compression Testing Machine, Compression Testing Machines, Erichsen Testing Machine, Erichsen Testing Machines, Laminated Spring Testing Machine  
  
Home sitemap Contact
 

Hardness Testing Machines
Mechanical Universal Testing Machine
Electronic Universal Testing Machine
Electro Mechanical Universal Testing Machines Unitek 9400
Electro Mechanical Universal Testing Machines Unitek 9700
Electro-Mechanical PC Control Universal Testing Machine
Compression Testing Machine
Erichsen Testing Machine
Laminated Spring Testing Machine
Torsion Testing Machine
Impact Testing Machine
Rockwell Hardness Testing Machine
Vickers Hardness Tester VM 50
Computerised Vickers Hardness Tester [Model : VM 50 PC]
Computerised Brinell Image Analysis System [B.I.A.S]
Portable Brinell Hardness Tester
SAROJ make Rockwell Hardness Testing Machine
Brinell Hardness Tester Model B 3000 [O]
Brinell Hardness Tester Model B 3000 [H]
Dynamic Balancing Machine Model HDM
Dynamic Balancing Machine model HDCM
Dynamic Balancing Machine Model HDVM & HDVTM

 
 

Imapct Testing Machine

 
Impact Testing Machine
Impact Testing Machine
General Description :
 
   
The pendulum Impact Tester Model IT 30 is designed for conducting izod, Charpy test. The test methods confirm to  BS : 131 : part 4-1972 (amended 15 Aug. 1993) BSEN : 10045-2 : 1993 & ASTM : E-23-94a.
The Pendulum Impact Tester is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale. (It is read on digital readout in case of electronic machines.)
   
There are two strikers and one combined support available for lifting in to the pendulum and on to the base of the machine for Izod., Charpy test, Changing from one striker to another is achieved simply by fixing the new striker into it's position.
   
   
 
 
 
 
   
CHARPY TEST :
   
The charpy test piece rests on alloy support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.
   
IZOD TEST :
   
The Izod test is clamped vertically in Izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the Allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied.
iImpact Testing Machine
 
Impact Testing Machine
   
 
 
 
Impact Testing Machine
   
CHARPY TEST :
   
Impact Testing Machine offered with 300J energy exclusively for Charpy test confirming to ASTM- E-23. This machine is geometrically checked in the works to the more stringent requirements of the American standard. The accuracy of the machine is then verified by PROOF TEST by testing standard test specimens supplied the NIST, USA. All two sets of the five specimen must agree with the normal values within certain tolerance specified. 
   
Impact Testing Machine
 
   
 
   
 
MODEL
IT-30
IT-30D
IT-30 (ASTM)
Charpy Test
IT-1.5
IT-0.5
 Maximum capacity
300J/168J
300J/170J
300J
15J
5J
 Minimum Scale
 Graduation
2J
0.5J
2J
0.1J
0.05J
 Overall Size (Approx.)
1.1m x 0.45
m x 1.65 m (H)
1.32m x 0.45 m x 1.05 m (H)
1.4m x 0.5 m x 1.9 m (H)
0.5m x 0.3 m x 0.52 m (H)
0.5m x 0.3 m x 0.52 m (H)
 Net Weight (Approx. ) 
375 kg
375 kg
450 kg
70 kg
70 kg
   
OPTIONAL ACCESSORIES FOR IT 30 / IT 30 D :
 
   
Caliper gauge for checking V notch for Izod & Charpy.
Templates for checking 10 x 10 mm cross section of Izod / Charpy test specimen.
Depth notch gauge including V & U notch gauges for checking depth blow V/U notch, angle and radius.
Izod support for 0.450 dia Izod round specimen.
Self centering tong for quick and accurate setting of Charpy test specimen.
'V' notch milling cutter
'U' notch milling cutter
 
 
 
 
Designed by : MID Hosted by : GID Promoted by : PBD